LS223 Coating Thickness Gauge
I. LS223 Coating Thickness Gauge Introduction
Linshang LS223 coating thickness gauge also called coating thickness tester is an instrument that separates the host from the probe. The measuring range is 5000μm and the meter can automatically identify the measuring substrate. This instrument uses both Hall Effect and eddy current measurement principles to measure the non-magnetic coating thickness on magnetic substrates and the non-conductive coating thickness on non-magnetic substrates. It is a dual-use instrument for both ferrous and non-ferrous substrates.
LS223 coating thickness gauge
II. LS223 Coating Thickness Gauge Application
LS223 coating thickness tester is widely used in hardware manufacturing, shipbuilding, aerospace, mechanical equipment evaluation and other fields. This meter is especially suitable for large thickness coating inspection. The following are a few examples of practical applications of the LS223 coating thickness gauge for reference. (The following measurement industries do not represent all)
III. LS223 Coating Thickness Gauge Parameters
| Parameter | LS223 Coating Thickness Gauge |
| Probe tip | Ruby fixed |
| Measuring principle | Fe:Hall Effect / NFe: Eddy current |
| Measuring range | Fe:0.0-5000μm NFe:0.0-3000μm |
| Resolution | 0.1μm:(0μm-99.9μm) 1μm:(100μm-999μm) 0.01mm:(1.00mm-5.00mm) |
| Accuracy | ≤±(3% reading+2μm):0-3000μm ≤±(5% reading+2μm):3000-5000μm |
| Unit | μm / mil |
| Measuring interval | 0.5s |
| Minimum measuring area | Ø = 25mm |
| Minimum curvature | Convex:5mm / Concave:25mm |
| Minimum substrate thickness | Fe:0.2mm / NFe:0.05mm |
| Display | 128×64 dot matrix LCD |
| Power supply | 2pcs of 1.5V AA alkaline battery |
| Range of operation temperature | 0℃-50℃ |
| Storage temperature range | -20℃-60℃ |
| Host size | 126*66*35 mm |
| Probe size | 22*26*55 mm |
| Weight(with battery) | 160 g |
IV. LS223 Coating Thickness Gauge Characteristics
1. The probe supports trigger power-on, it can automatically identify the measurement substrate and automatically switch
2. No calibration is required, just simple zero adjustment for a new measurement.
3. The LS223 coating thickness tester has wide measurement range and the thickest measured materials can be 5mm.
4. Adopting advanced digital probe technology to provide good measurement accuracy and measurement repeatability to ensure the inspection of Chinese national metrology. The test data of Linshang LS223 coating thickness gauge can be compared with the test data of foreign coating thickness gauge.
5. The instrument has the temperature compensation function and digital function of the analog signal end, which can make the sensor signal of the coating thickness gauge more stable. The test accuracy of the instrument is not affected under the condition of large temperature changes.
LS223 paint thickness gauge accuracy test
6. The coating thickness meter has a real ruby probe, it has a strong resistance to corrosion and abrasion, which can extend the service life of the meter.
7. LS223 has three measurement modes: iron-based measurement (Fe), non-ferrous-based measurement (NFe) and automatic identification (Fe / NFe). Language (Chinese and English) and unit can be set.
8. This product can trigger the start-up, applicable to ultra-thin substrate: Fe: 0.2mm / NFe: 0.05mm.
V. Product Qualification and Standards
1. LS223 coating thickness gauge conforms to the following standards
GB/T 4956-2003 Non-magnetic Coatings on Magnetic Substrates-Measurement of Coating Thickness-Magnetic Method
GB/T 4957-2003 Non-conductive Coatings on Non-magnetic Basis Metals-Measurement of Coating Thickness-Eddy Current
DIN EN ISO 2808 Paints and Varnishes-Determination of Film Thickness
JJG-818-2005 Verification Regulation of Magnetic and Eddy Current Measuring Instrument for Coating Thickness
VI. LS223 Coating Thickness Gauge Operation Video
VII. LS223 Coating Thickness Gauge Packing Details
| No. | Item | Quantity | Unit |
| 1 | LS223 Coating Thickness Gauge | 1 | Set |
| 2 | Fe plate of zero adjustment | 1 | Pcs |
| 3 | NFe plate of zero adjustment | 1 | Pcs |
| 4 | Standard film | 1 | Pcs |
| 5 | Instruction manual | 1 | Pcs |
| 6 | Certificate/Warranty card | 1 | Pcs |
| 7 | 1.5V AA alkaline battery | 2 | Pcs |
VIII.Linshang Coating Thickness Gauge After-sales Service
The gauge has one-year warranty. If the gauge works abnormally, please send the whole gauge to our company for maintenance
Provide users with spare parts and lifelong maintenance services
Provide the users with the gauge inspection service
Free technical support for long term
Manufacturer: Shenzhen Linshang Technology Co.,Ltd. Website: https://www.linshangtech.com/
Service hotline: 0755-86263411 Email: sales21@linshangtech.com
IX. Recommended Products
● Measure coating thickness on ferromagnetic and non-ferromagnetic metal substrates
● Measurement range: 0.0-2000μm
● Accuracy: ≤±(3% reading+2μm)
● Measure coating thickness on ferromagnetic and non-ferromagnetic metal substrates
● Measurement range: 0.0-2000μm
● Accuracy: ≤±(3% reading+2μm)
● Measure plating thickness on ferromagnetic metal substrates
● Measurement range: 0-500μm
● Accuracy: ≤±(2%+0.3μm) after calibration of 1-5 points
● Test fixture is optional to eliminate the measurement errors