Light transmittance is one of the important indicators for judging the quality of glass. Whether it is glass, solar film or coated glass, its light transmittance can be tested by light transmission meter glass LS116.
As the technical level of the glass industry continues to increase, glass products are widely used in our daily lives.
Nowadays, people pay more attention to indoor lighting in today's living conditions, comfort levels, and energy conservation requirements. While glass is a transparent product, when we choose glass, the first thing we value is its light transmittance. The light transmittance of the test glass can use the light transmission meter glass.
Most of the architectural glass will be covered with a heat-insulating solar film, but the glass should be filmed at the same time as the light transmittance of the glass after the film is applied. The transmittance of the coated glass is equal to the transmittance of the glass times the transmittance of the solar film. However, whether it is glass, solar film or coated glass, the light transmission meter glass LS116 can be used to test its light transmittance.
Light transmission meter test glass transmittance
The light transmittance meter LS116 is specially used to test the light transmittance of glass products, solar films, coated glass, organic material panels and other materials. Not only can you test high-permeability materials, but you can also test materials with a large thickness. The thickest material to be measured can be about 100mm. And the accuracy is up to ±1%.
The light transmission performance of the glass directly affects the use of the glass, and the most direct way to test the transmittance of the glass is to use the light transmission meter glass LS116.