Coating Thickness Measurement Used in Metal Processing Industry

From:Linshang Time:2020/04/17 10:30:00 Browse:116
In some metal processing industries, the coating thickness measurement is often encountered. At this time, it is a good method to use a coating thickness meter for measurement.

1.What are the metal processing techniques?

Metal processing, in simple terms, refers to metalworking, which is a technology that processes metal material into parts, finished products, components and articles. Its processing technology is divided into many types, mainly including pouring, plastic molding processing and solid molding processing.
        Pouring refers to the process in which metal is melted after heating and poured into a model. This processing technology has extremely high continuity and accuracy. It is suitable for processing some complex metal parts. Moreover, the processing cost is relatively low and the input of complicated parts is relatively small. However, there will be some problems in the later stage, which requires a large number of subsequent processing procedures to ensure.
        Plastic forming mainly refers to the process of forming by external force. The material of this process is carried out under the premise of normal temperature or heating without melting. Among them, the forging process is one of the simplest and oldest metal processing methods, which is carried out under cold working or high temperature operation. It mainly uses the method of beating and extruding.
        Solid molding processing refers to processing methods performed under normal temperature conditions and the cost is relatively low. Continuous roll forming is similar to the extrusion process in that it is a metal processing method that can obtain a constant cross-section. But continuous roll forming has restrictions on the wall thickness of the processing element and can only obtain a single wall thickness. The stamping forming technology makes up for this defect and can control the hollow shape during processing.

2. Coating thickness measurement used in metal processing industry 

A big problem that the metal processing industry often faces is measuring the coating thickness of metals. Under this demand, coating thickness meters came into being. For measurement, the requirements for error control can be said to be extremely strict. The coating thickness meter has unique advantages here. Its error is relatively small. Therefore, it can make the measurement more accurate and reliable.
        Only accuracy is not enough, the convenience of operation is also a standard for considering coating thickness meters. The simple and convenient operation method can make the measurement personnel of different levels quickly master the essentials, greatly reducing the training time and improving the efficiency of the factory. In addition, Linshang Technology as a coating thickness meter manufacturer in China devoted to improve the accuracy and stability.
        Manufacturers use coating thickness meters to make measurements, which is a very wise choice. Especially in the metal processing industry, because the metal processing industry has higher requirements for accuracy. The coating thickness meter can ensure that the measurement results are more accurate. And the coating thickness meter is simple and convenient to operate, which can improve the efficiency in the metal processing industry measurement, reduce the measurement time and facilitate subsequent metal processing production.
        How does the metal processing industry measure coating thickness? Of course, choose the coating thickness meter! The error is extremely small, the operation is simple and convenient and the stability is also high, it is the best choice!

Related Articles