What is the Difference Between the Window Tint Meter LS162 and LS163?

From:Linshang Time:2019/12/13 13:45:00 Browse:190
Some customers are unclear about the difference between the Linshang LS163 and LS162 window tint meters. This article mainly describes the differences between the two instruments.

Since Linshang new LS163 window tint meter has been launched, customers have no idea what is the difference between Linshang LS163 window tint meter and LS162 window tint meter. Below we make a brief review of these two products.

LS162 window tint meter

Linshang LS162 window tint meter is a compact window tint meter for testing explosion-proof film. This instrument can measure visible light transmittance (VLT), ultraviolet rejection rate (UVR) and infrared rejection rate (IRR). This instrument is ideal for measuring absorbent films. The specific parameters of the instrument are as follows:

  • UV: peak wavelength 365nm

  • Visible light: 380nm-760nm full wavelength, in line with CIE photopic luminosity function

  • Infrared: peak wavelength 940nm

  • Measurement sample thickness: less than 8mm

  • External dimensions: length 120mm × height 25mm × width 75mm

LS163 window tint meter

Linshang LS163 window tint meter is also a portable window tint meter. The instrument can also measure three parameters, namely the visible light transmittance, UV and IR rejection rate. We can also set to instrument to test the visible light transmittance, UV and IR transmittance. The specific product parameters are as follows:

  • UV: peak wavelength 365nm

  • Visible light: 380nm-760nm full wavelength, in line with CIE photopic luminosity function

  • Infrared: peak wavelength 940nm

  • Measurement card slot size: width 6mm × depth 58mm

  • Outline dimensions: length 146mm × width 73mm × height 24mm

It can be seen from the above parameter table that the window tint meters LS162 and LS163 are still very different. In fact, in addition to the above intuitive differences, these two window tint meters have other differences. The specific summary is as follows:

window tint meters

  1. The appearance size is different, compared with LS163, the LS162 window tint meter is more compact.

  2. The size of the test slot is different.

  3. The display mode is different. The LS162 window tint meter can only display visible light transmittance (VLT), ultraviolet rejection rate (UVR) and infrared rejection rate (IRR). The LS163 window tint meter have three display modes.

  4. The LS163 window tint meter has a LCD rotative interface, which is suitable for various measurement occasions and convenient for reading. The LS162 window tint meter cannot.

  5. The LS163 window tint meter can be set to display the transmittance parameter VLT separately, while the LS162 window tint meter cannot.

The above is the difference between the two products and we hope the introduction can help you understand the two window tint meter.


Related Articles