Application of UV germicidal lamp intensity detector in UV disinfection cabinet industry

From:Linshang Time:2019/04/23 17:21:00 Browse:193
UV germicidal lamp intensity detector LS126C is a necessary tool for detecting the intensity of UV germicidal lamps. It is widely used in the medical industry, small household appliance disinfection cabinet industry.

      When the disinfection cabinet is inspected, theLS126C UV light meter probe  should be placed under the disinfection cabinet lamp to test the four corners and the middle of the disinfection cabinet. The four sets of data should all exceed the national standard of 70uW/cm2.
      UV germicidal lamp intensity detector LS126C is a necessary tool for detecting the intensity of UV germicidal lamps. It is widely used in the medical industry, small household appliance disinfection cabinet industry.
      UV disinfection cabinet refers to the tools for drying, sterilizing, dehumidifying and dehumidifying utensils, such as tableware, towels, utensils, hairdressing appliances and medical equipment, by means of UV rays, high temperature, far infrared rays and ozone. The shape is generally box-like, and most of the cabinet is made of stainless steel. With the improvement of people's living standards, the importance of UV disinfection cabinets has also attracted more and more attention from families.


LS126C UV light meter

       When the UV disinfection cabinet is used for a while, the intensity of the UV lamp will decay. After long use of the cabinet, it will gradually lose the bactericidal effect .Therefore, the UV intensity detection of the disinfection cabinet is particularly important. The LS 126C UV light meter is mainly used for the intensity detection of UV germicidal lamps. The UV lamps in the disinfection cabinet are not like the UV lamps of the hospital, When the disinfection cabinet is inspected, the LS126C UV Light meter probe should be placed under the disinfection cabinet lamp to test the four corners and the middle of the disinfection cabinet. The four sets of data should all exceed the national standard of 70uW/cm2. If a set of data is below 70uW/cm2, the lamp should be replaced.
       UV germicidal lamp intensity detector LS126C, equipped with a 1 meter test hook for easy detection when operating. When measuring, the meter is hung under the lamp tube. Then the measuring person leaves, and next the UV germicidal lamp is turned on. After 10 minutes, the test results can be checked.

Tags: UV light meter
Related Articles Links
Contact Us
  • (086)0755 86253231
  • (086)13510633052
  • linksun2008
HOME
CONTACT
BUY
EMAIL