LEDCure-a LED-specific EIT UV Power Puck
EIT is one of the well-known brands in the UV light measurement equipment industry, EIT UV Power Puck ii is very popular all over the world. Since Linshang Technology introduced the first LS128 LED-specific UV energy meter, the EIT has also launched a series of UV Energy Meter called LEDCure M, which is used to measure the intensity and energy of UV LED light source.
The difference with the previous EIT UV Power Puck is that this series of products can only test one band, while the previous EIT UV Power Puck can test four bands of ultraviolet light at the same time. The LEDCure M series is available in four wavelengths: L365 (for 365nm LED), L385 (for 385nm LED), L395 (for 395nm LED), and L405 (for 405nm LED).
1. The spectral response of L365 ranges from 340 nm to 392 nm and the center wavelength of the response is 365 nm.
2. The spectral response of L385 ranges from 360 nm to 412 nm and the center wavelength of the response is 385 nm.
3. The spectral response of L395 ranges from 370 nm to 422 nm and the center wavelength of the response is 395 nm.
4. The spectral response of L405 ranges from 380 nm to 432 nm and the center wavelength of the response is 405 nm.
We all know that the more common LED light sources are 365nm, 385nm, 395nm and 405nm. From the above introduction, it is not difficult to find that LEDCure is designed for these LED light sources.
EIT LEDCure M series has a measurement accuracy of ±10%. The power measurement range is 0-40000mw /cm2. The sampling speed of the instrument in smooth mode is 25 times / seconds, 2048 times / seconds in non-smooth mode, this data is basically the same as the LS128 UV energy meter. The operating temperature range is 0-75 degrees Celsius, the instrument can withstand external high temperature in a short time, and there will be an alarm sound when the temperature exceeds the upper limit.
EIT has a long history in the UV detection instrument industry. EIT UV Power Puck is a successful product, but the price of EIT products is a factor that discourages customers. It is well known that the price of EIT products is not low, many customers will still consider the cost-performance ratio of the product when choose an UV energy meter.