The application of UV disinfection technology is very extensive and the detection of UV radiation intensity is also very important. The UVC uv light meter LS126C is an optical detection instrument necessary for UV intensity detection.
Ultraviolet disinfection technology is applied in various fields such as modern epidemic prevention, medicine, food disinfection, pure water treatment and photodynamics.
This is a special design of high efficiency, high intensity and long life UVC band ultraviolet light to illuminate the running water, kill various bacteria, viruses, parasites and other pathogens in the water directly to achieve the purpose of disinfection. The UVC uv light meter LS126C is a measurement specific to the ultraviolet radiation sterilization intensity.
In the process of ultraviolet radiation sterilization, it is necessary to ensure the intensity of ultraviolet radiation. If it is unstable, the effect of sterilization will be greatly reduced. Some people think that when the radiation intensity of the ultraviolet lamp is not enough, increasing the time of ultraviolet irradiation can also achieve the effect of sterilization. This kind of thinking is unreasonable. It is like boiling water. If the temperature does not reach 98 degrees, it will not achieve the disinfection effect.
In addition, the effect will not better when the intensity of ultraviolet radiation is higher. Because the ultraviolet rays are in contact with the human body. It also has certain adverse effects on human skin and organs. Therefore, the intensity of ultraviolet radiation must be controlled and stabilized, considering that the radiation intensity will be slightly weakened during the use of the ultraviolet germicidal lamp. Therefore, in order to achieve good results in ultraviolet disinfection, it is necessary to pay attention to the intensity of ultraviolet radiation. It is necessary to use UVC uv light meter for detection and confirmation.
UVC uv light meter LS126C is an optical detection instrument necessary for UV intensity detection. The detector is located on the front end of the instrument, which is easy to use and has high measurement accuracy. The probe and the host are connected by high temperature wires, and the probe can be used in a high temperature environment. The probe comes with a magnet and a detachable handle for easy fixing and operation during the test.