Application of Gloss Testing Equipment in Cement Products

Time:2020/03/04 13:50:48 Browse:537

1. How to improve the gloss of cement products?

Generally speaking, ordinary cement floor has no gloss. Gloss is a characteristic of object surface. The degree of gloss depends on the ability of the object surface to reflect light. For cement products, even if the surface looks flat, in fact, the cement surface still shows a lot of irregularities. When light hits these uneven surfaces, it reflects in different directions, so the ground we saw was bleak.

cement

However, after passing through different additives and curing agents, as the hardener product penetrates into the concrete, the uneven pores on the surface are closed. After polishing, the gloss of the floor can be enhanced, so that the floor forms a solid whole. When the light shines down, the ground shows a beautiful gloss.

2. Cement product gloss detection method

During the processing of cement products, the differences in the ratio of additives and polishing processes will also cause the gloss change of cement products. The gloss of an object is distinguished according to its ability to reflect light at specific angles. It is often said that the gloss is a physical quantity that evaluates the ability of a material to produce specular reflection at a set of specified geometric angles. In theory, gloss is defined as the surface's specular reflection ability to the full specular reflection ability. In order to accurately evaluate the surface gloss of cement products, it can be measured by a gloss testing equipment. The gloss testing equipment can accurately measure the surface of high-gloss objects, medium-gloss objects and matte objects. For unknown gloss of cement products, users can directly detect through the Linshang gloss testing equipment.

gloss testing equipment

Now Linshang Technology has introduced a gloss testing equipment LS192, the first instrument that can be compared with German gloss testing equipment BYK. LS192 gloss testing equipment has the following characteristics:

● Various measurement modes of the instrument, automatic measurement and manual measurement.

● Real-time measurement.

● It can display real-time value, maximum value, minimum value, average value, standard deviation values. The smaller the standard deviation values, the more uniform of the object gloss.

● Ultra-small design.

● The number of storage groups can be set by yourself. A maximum of 99 sets of data can be measured.

● The instrument meets the national metrological verification regulations JJG 696 level gloss testing equipment standard.

● Connect to the computer and output professional reports in real time.

Enquiry