Gloss Meter Selection and FAQ

From:Linshang Time:2019/11/06 14:04:00 Browse:12685

Gloss Meter upplier Linshang Technology provides 60 degree and multi-angle    marble gloss meter for surface gloss detection of stone, paint, metal, plastic, fabric, tile, ceramic and other materials. There are six types of gloss meters: LS190, LS192, LS193, LS195, LS196 and LS197. It is a gloss meter produced according to the national verification regulations JJG 696-2002 "Mirror Gloss Meter and Gloss Plate".All the indicators meet the requirements of the Grade 1 working machine in the metrological verification regulations.

LS192 gloss meter measure high gloss materials

LS192 gloss meter measure high gloss materials

LS193 gloss meter measure small size plastic material

LS193 gloss meter measure small size plastic material

LS195 gloss meter measuring car paint

LS195 gloss meter measuring car paint

LS197 gloss meter measuing ceramic

LS197 gloss meter measuing ceramic

Linshang Gloss Meter SelectionTable

Model LS190 LS192 LS193 LS195 LS196 LS197
Measuring Angle 60° 20° / 60° / 85°
Measuring Range 0-200GU 0-1000GU 0-200GU 0-1000GU 20°:0-2000GU
Fuselage Material Engineering plastic Aluminum alloy Engineering plastic
Repeatability 0-100GU:±1GU;100-200GU:±1% 0-100GU:±0.2;100-2000GU:±0.2%
Reproducibility 0-100GU:±1GU;100-200GU:±1% 0-100GU:±0.5;100-2000GU:±0.5%
Indication Error 0-100GU:±3GU;100-200GU:±3% 0-100GU:±1.5;100-2000GU:±1.5%
Zero Error 1GU 0.1GU
Resolution 1GU 0.1GU
Power Supply Lithium rechargeable battery 3.7V@650mAh
Measuring Aperture 9mm*15mm 1.5mm*3mm 9mm*15mm 20°:9mm*9mm
Minimum Test Material Size 20mm*10mm 3mm*6mm 20mm*10mm 57mm*10mm
Weight About 237g About 300g About 237g About 300g

Gloss Meter Details

1. Linshang Gloss Meter advantages

  1. High precision: meet the national first-class working machine standards and ensure to pass the inspection of Chinese national metrology institute.

  2. Simple operation:Real-time measurement,there is no need to press the button.

  3. Power-on self-test: It automatically detects whether the standard board is dirty or not and automatically prompts whether it needs to clean the standard board.Avoid inaccurate testing due the fouling of the standard board.

  4. PC software: the computer can perform intelligent statistics on the data and generates measurement reports, which makes the measurement more professional.

2. Linshang Gloss Meters

Easy to operate, Refuse to wait
Support QC mode to improve inspection efficiency
Meet the national secondary machine standards
● Measuring range: 0-1000GU
● put-and-measure, convenient
● Automatically judge whether the measured value is qualified
● Minimum Testing material size: 3mm*6mm
● Suitable for measuring curved or mini size material
● Measuring range: 0-1000GU
● Put and test, easy to operate
● Support QC mode to improve measurement efficiency
● Conform to Chinese Grade 1 gloss meter standards
● 60° universal angle design
● Maximum measuring range up to 1000GU
● Support QC mode to improve measurement efficiency
● 20°/60°/85° multi-angle measurement modes
● Large range design, up to 2000GU
● Support QC mode to improve measurement efficiency

Gloss Meter FAQ

  1. 1. Can the gloss meter be connected to the computer?

    Yes,the sheen instrument is equipped with a USB cable and computer software, which can be connected to the computer for automatic measurement.The test data can be archived to generate a test report.

  2. 2. Is it necessary to replace the light source after using the gloss meter for a long time?

    The sheen instrument does not require frequent replacement of the light source.

  3. 3. What battery is used for the gloss meter? Is it power?

    The sheen instrument is powered by a rechargeable lithium battery, which is ultra-low power consumption and can be used continuously for more than 50 hours at a time.

  4. 4. Does the gloss meter have to be calibrated with a standard board before each measurement?

    It is not required because the sheen instrument has a temperature compensation function to ensure long-term data stability without frequent calibration.

  5. 5.Are you a manufacturer or trade company?

    We are factory , we have engineers for researching & designing  and workers for produce and operate etc, we could support you one-stop products and service.

  6. 6.Do you offer OEM and ODM service?

    Yes. We can supply OEM and make customized design for any specific application.