Coating Thickness Gauge Measurement Principle

2020-03-18

Coating thickness gauge can non-destructively measure the thickness of non-magnetic coatings (such as iron-plated aluminum, iron-chrome plating, iron-plated copper, iron-plated enamel, rubber on iron ). It can also measure the thickness of non-conductive coatings (such as enamel, rubber, paint and p

Effect of Pretreatment Process on Coating Adhesion

2020-03-16

Adhesion is essentially the force at the interface. It is the firmness between the organic coating and the substrate through physical and chemical interactions. It mainly includes two aspects: the ability of the organic coating bonding to the metal substrate and the organic coating. The degree of cr

Coating Thickness Gauge | Car Metal Anti-corrosion Coaing Thickness

2020-03-16

With the research and development of new automotive technology and new materials, the anticorrosion of automotive metals has shown rapid development. It will develop in the following directions: (1) New materials will gradually replace some old metal materials. Like high-strength and high-elastic-mo

Anticorrosive Method for Automobile Metal

2020-03-16

1. Automotive metal anticorrosion method one: blue treatment of steel parts When steel parts are heated in air-water vapor or chemical drug solution to a certain temperature, a black or blue oxide film will be formed on the surface, thereby improving the corrosion resistance of steel parts. This pro

What Brand of Car Paint Meter is Good?

2020-03-15

Do you know what brand of car paint meter is better? We have to say that Linshang car paint meter has just received warm welcome from second-hand rims as soon as it is on the market. What has been used is no different from the Q-nix 4500. Especially for the used car industry, the instrument must be

Super Cost-effective Paint Thickness Tester

2020-03-14

surface paint thickness tester In the surface coating industry, people who often use surface paint thickness testers know that Chinese instruments have a limitation. If the substrate is too thin, the instrument can’t be used. Since Linshang paint thickness tester was launched last year, this limitat

Knowledge of Fire-resistant Coatings and Paint Coating Thickness Gauge

2020-03-14

With the improvement of people's safety awareness, fire-resistant coatings are increasingly used in life and industry. But is the fire-resistant coating thick or thin? Below we give a brief introduction to the relevant knowledge of fire protection coatings. 1. The relevant thickness of fire coating

What to do if the Test Data of Paint Thickness Gauge is Inaccurate?

2020-03-10

LS220 paint thickness gauge is Linshang's star product in 2019. It was launched at the end of 2018 and has been recognized by a large number of users in just one year. The biggest features of this instrument are simple use and accurate detection. Without complicated calibration process, simple zero

Automotive Paint Meter-Best Car Evaluation Tool

2020-03-10

Today, professional vehicle evaluations are only possible with automotive paint meters. People in the used car industry need these instruments to perform a professional value assessment when buying a used car for vehicle recycling and to check the wear degree of the paint. The reason is obvious: the

Coating Thickness Control of Sheet Metal Spray Paint

2020-03-09

The term "sheet metal spray paint" we often hear is probably used in car repairs. In fact, sheet metal spray painting is a process that can be used not only in the auto repair industry but also in home appliance repair. The quality of the sheet metal spray painting process is directly related to the

Non-stick Pan Coating and Dry Mil Paint Thickness Gauge

2020-03-08

In the family, people often worry about sticky pans when cooking or frying eggs, so they choose to buy non-stick pans. So what is the mystery of the non-stick non-stick pan? The answer lies in the coating of the nonstick pan. The non-stick coating is a non-stick coating composite. First, there are t

Characteristics of Anticorrosive Coatings and Thickness Measurement

2020-03-08

1. What are the characteristics of anticorrosive coatings? (1) Powerful The anticorrosive coating can be used under severe conditions and has long-lasting anticorrosive life. Heavy anticorrosive coatings can generally be used for 10 or more years in chemical atmospheric and marine environments, even

Classifications of Anticorrosive Coatings

2020-03-07

Anticorrosive coatings are generally divided into conventional anticorrosive coatings and heavy anticorrosive coatings, which are an essential coating in paint coatings. Conventional anti-corrosive coatings are used to prevent corrosion of metals and other materials under normal conditions and prote

Eddy Current Thickness Gauge | What are the Metal Coating Processes?

2020-03-07

The basic metal coating process requires surface cleaning before the anti-corrosion construction of metal equipment. This can ensure that the coating and the base metal are in good contact. However, the surface of general metal parts usually has oxidation, rust, burrs, oil and moisture. So metal mus

Why do We Use Anti-corrosion Coating ?

2020-03-07

Anticorrosive coatings are created to cater to industrial corrosion protection of instruments and equipment. Corrosion is a headache in industrial production. On the one hand, corrosion is unavoidable. No matter where the instrument is placed, it is impossible to completely meet the optimal storage

Paint Thickness Checker | New Metal Anticorrosion Technology

2020-03-06

With the development of science and technology, metal surface treatment technology is also diversified. What are our common metal anticorrosion methods? Which is the new technology worth learning? Today, we will answer your doubts. 1. Phosphating of metals After the steel products are degreased and

The Importance of Metal Corrosion Protection

2020-03-06

1. The importance of metal corrosion protection The world loses more than 100 million tons of metal every year due to corrosion, accounting for 20% to 30% of the annual metal output. According to the survey statistics of industrial developed countries, the huge economic loss caused by corrosion dama

Three Treatment Methods for Metal Anticorrosion

2020-03-06

Corrosion is one of the main reasons for the damage of metal products. Metal is the main constituent material of many mechanical spare parts. Therefore, for the characteristics of metal products that are easily corroded, we must take special anti-corrosion measures to properly and effectively preven

What Exactly does Anticorrosive Coating Do?

2020-03-06

The anti-corrosion coating can protect the steel and play an anti-corrosive role. People generally agree because of the following three effects: Shielding effect: The shielding effect of the paint film layer is to isolate the direct contact between the protected substrate and the corrosive medium.

Use Zinc Plating Thickness Tester to Measure Galvanized Layer Thickness

2020-03-05

In the metal coating processing industry, in order to evaluate the galvanized coating thickness, a zinc plating thickness tester is often used. This article mainly describes the working principle, measuremen range of zinc plating thickness tester and how to measure the galvanized coating thickness.

Precautions When Using Paint Thickness Measuring Device

2020-03-03

What will affect the paint thickness measuring device accuracy? 1. When the thickness of the cover layer is greater than 25μm, its error is approximately proportional to the thickness of the cover layer;2. The conductivity of the base metal has an influence on the measurement, it is related to the c

Anti-corrosion Coating and Paint Thickness Checker

2020-03-02

What is the coating added to the anticorrosive surface? This substance can be simply called an anticorrosive coating. This is a coating that is widely used in transportation, marine, construction, energy engineering and other fields. It plays an important role in anti-corrosion of objects. According

Things You Should Know About Anticorrosive Coating

2020-03-02

In order to ensure the quality of food in daily life, we will carry out anti-corrosion measures such as refrigeration, preservation, sealing and so on. In most cases in industrial production, the production environment is relatively harsh for the instrument. It is necessary to take coatings to impro

Anti-corrosion Paint Film Thickness Gauge

2020-03-02

Adding anti-corrosion coating is a widely used anti-corrosion method in modern industrial sectors. In order to achieve the desired anticorrosive effect, the thickness of the anticorrosive coating needs to meet industry specifications and national standards. Anti-corrosion paint film thickness gauge,

Precautions and Application Magnetic Coating Thickness Gauge

2020-03-01

1. Where can magnetic coating thickness gauge be used for? Magnetic induction thickness measurement can be used to measure the thickness of the non-magnetic coating on the magnetically per io9meable substrate. Generally, the relative permeability of the substrate is required to be above 500. If the

Magnetic Paint Thickness Gauge For Sale

2020-03-01

In industrial production, in order to ensure the quality of the product, or to achieve a more satisfactory production effect, the thickness of the produced product is often made relevant regulations. In order to check whether the thickness of the relevant object meets the requirements, a thickness g

High Temperature Resistant Anticorrosive Coating and Dry Mil Gauge

2020-03-01

Anti-corrosive coatings can protect the materials in the anti-corrosion coating from corrosion damage by adding chemical substances to prevent the internal and external chemical reactions based on chemical principles. Compared with ordinary anticorrosive coatings, high-temperature-resistant anticorr

High-precision Paint Thickness Measurement Tool

2020-03-01

High-precision paint thickness measurement tool can measure the thickness of coating on the surface of objects. High-precision paint thickness measurement tools are used in different scenarios such as scientific research laboratories or construction sites. Compared with ordinary paint thickness meas

Application of Anticorrosive Coatings in Automobiles

2020-02-29

Anti-corrosion coating can be applied to various metal surfaces to prevent corrosion. In order to ensure that the thickness of the anti-corrosion coating on the car body meets the requirements of anti-corrosion, the thickness of the anti-corrosion coating needs to be measured using an anticorrosive

Application of Anticorrosive Coating on Highway Guardrail

2020-02-29

We know that highway guardrails play an important role in traffic safety and preventing traffic accidents. In order to improve the safety performance, the guardrails of expressways are generally designed with special anticorrosive performance. The metal treatment on the surface of common highway gua

How to Measure the Thickness of Anticorrosive Coating?

2020-02-28

The anticorrosive coating contains a solid lubricant of a high molecular phenolic resin organic binder. It has excellent corrosion resistance, chemical resistance, abrasion resistance and adhesion. It can process products of various shapes. It can greatly enhance the corrosion resistance of treated

Role of Anticorrosive Coatings and Thickness Measurement

2020-02-27

With the continuous and rapid development of China's economy, the demand for energy continues to increase. The amount of pipeline construction is also increasing. The various gas supply, water supply and heating pipelines to be constructed in various urban planning are even more numerous, which make

Pipe Anticorrosive Coating and Coating Thickness Measurement

2020-02-26

Corrosion is the main cause of material failure. Metal corrosion is a major economic problem. According to relevant statistics, China ’s annual loss due to metal corrosion accounts for about 5% of the national economy, of which pipeline corrosion accounts for a significant proportion. . 1. Developme

Fire-resistant Coating Application and Fire Resistance

2020-02-26

1. The role and principle of fire protection coating The fire-resistant coating is a special coating used on the surface of flammable substrates, which can reduce the flammability of the coated material surface and block the rapid spread of fire to increase the fire resistance of the coated material

Anticorrosive Materials and Its Coating Thickness Measurement

2020-02-26

1. Two categories of anticorrosive coatings Anticorrosive coatings can be divided into two categories, namely oil-based paints (film-forming substances are dry oils) and resin-based paints (film-forming substances are synthetic resins). It is a thin coating formed on the object surface by a certain